Pair of FRONT AND BACK (SIZE SMALL to LARGE) 10x12 Level IV Ballistic Front or Back Plates (Curved with Shooters Cut)

$299.00 USD $449.00 USD

Pair of FRONT AND BACK (SIZE SMALL to LARGE) 10x12 Level IV Ballistic Front or Back Plates (Curved with Shooters Cut)

$299.00 USD $449.00 USD
In Stock
$299.00 USD $449.00 USD
Real time Visitor right now
  • Description

    (This is for TWO Plates not a single if you need only one order the single)

    FREE SHIPPING Included!

    This is for two SIZE SMALL to LARGE for the Front and Back which fits the average size person, the is what 90% of the people use from us. (see sizing chart below)

    This Plate is made of Lightweight Alumina PE Material and has been tested with accordance to the NIJ Level IV Standards. It has the curved contour for more comfort while wearing it. It also has the SAPI shooters cut in the corners to make it more functional.


    We make this ballistic plate in two sizes, size Small to Large and size Extra Large, please see our sizing chart below to help determain the best size for you (most people take the Small to Large Size only the Big Big Boys need the Extra Large Size)

    • SMALL to LARGE SIZE: 10"X12" (3/4 Inch thick)
    • WEIGHT: 5 Pounds 10 ounces 
    • MATERIAL: Ceramic (AL203)Tile Front with a Hardened Layered Polyethylene Backing, so it is a lot lighter then steel plates and can take multiple hits. 

    TESTED TO LEVEL IV: This rated to stop armor piercing rounds up to 30-06 Black Tip Armor Piercing Caliber, and calipers below it which includes 5.56, .223, 7.62x39.

    Coverage Area:

    -10x12 Size Plate with 9x11" ceramic coverage on the front and 10x12 Polyethylene Coverage behind it. (This is a stand alone plate requiring no trauma plate)

    COLOR: Due to the war in Ukraine its become more difficult to get materials for ballistic plates so the plates covers may either be green or black at this time. 


    Shooter Cut Plate Small to Large Size EXTRA LARGE Size Plate
    Chest 30 – 35”

    36 – 47”


    Length of Plate

    -Determine the optimum plate length for you.
    -When standing, the top plate edge should rest at the level of the  jugular notch (you can feel the top of the bone at the bottom of your neck)
    -Bottom plate edge should extend to approximately 4.5 inches above service belt ensuring protection of vital organs and vessels.

    (We can not be responsible for the sizing of the plate, it is your responsibility to determine if the plate will cover your vitals)


    Plate Skin Color Options:

    • Standard Cover (Black)
    • OCP Camo (additional $8 per plate) New option,  shipping time currently 2 weeks 


    We can ship to all US States except New York and  Connecticut. For NY and CT after purchase you must provide ID showing you are law enforcement, active duty military, security, first responder etc.

    Dus to the war in Ukraine and Israel we are getting large orders of armor so we are currently 7 days to ship some other companies are getting to be a month so order soon demand is picking up..

    Due to ITAR Regulations we cannot ship outside of the US, if you need this for private contracting work or other protection out of country please ship to an address in the Continental US and then you will need to fill out the Homeland Security FORM 4457 and apply for the Certificate of Registration for Personal Effects Taken Abroad

    At this time we aren’t allow to ship armor to PO BOXES. Please let us know if this is an issue.

    History Lesson:

    Body armor has been used for protection for centuries. The first body armor was made from animal hides or woven fibers, and was used by ancient warriors to protect themselves from the blows of their enemies.

    Later, armor made of metal plates became popular, making knights in the Middle Ages almost impregnable in battle.

    During World War II, better forms of body armor were developed, including bulletproof vests and helmets made from sturdy materials like steel and Kevlar.

    Today, modern body armor is made with advanced materials such as ceramic and composite fibers, which make it highly effective at stopping modern weapons. Which is what these Level IV plates are made of, stay safe! 


    By Purchasing this product you agree to the following terms:

    No background check is needed to purchase. But check with your local state laws as far as wear you may wear this armor. And we cannot ship to Connecticut and due to ITAR Regulations we cannot ship outside of the US, if you need this for private contracting work or other protection out of country please ship to the Continental US and then you will need to fill out the FORM 4457

    **US law restricts possession of body armor for convicted felons. Many U.S. states also have penalties for possession or use of body armor by felons. By purchasing body armor from Redemption Tactical, you are certifying that you have not been convicted of any crime that would restrict you from being able to purchase or possess body armor under any Federal or State laws.

    You also agree to hold Redemption Tactical and its associates harmless for any damage, injury or death that may in-cure with the use of this product. Additionally, you are acknowledging that you do not intend to use the body armor for any criminal purpose and that you are over the age of 18 years old.

    ***Due to this type of product, all sales are final. So no returns are accepted after the order has been placed. Please make sure you have made your final decision before ordering as the item cannot be returned.

    Redemption Tactical assumes No liability other than Manufacturer’s Warranty, as applicable, and hereby make no warranty, express or implied. We neither assume, nor authorize any person to assume for us, any liability in connection with the sale or use of the goods sold, and there are no oral agreements or Warranties collateral to or affecting this agreement. We hereby give notice that any statement made by us in the sale of the goods, shall not create any warranty that the goods be fit for any particular purpose. Statements, images, videos or descriptions are informational only, and not made or given as a warranty of the goods in any way. We specifically disavow any other representation, warranty, or liability related to the condition or use of the goods.

    Redemption Tactical, its owners, Officers, and/or affiliates (including Daybreak Expeditions LLC.) do not cover any consequential damages, and liability is limited to repairing or replacing defective goods. We are not an insurer, and bear no liability for any use, misuse, or failure to perform. Our Manufacturer Warranty as applicable IS IN LIEU OF ALL WARRANTIES INCLUDING THE IMPLIED WARRANTIES OF FITNESS AND MERCHANTABILITY. INCIDENTAL AND/OR CONSEQUENTIAL DAMAGES ARE EXCLUDED.
    NO Antiballistic panel or armor or protective gear of any kind, is 100% bulletproof or bullet resistant. A “bulletproof / bullet resistant" panel, vest or other carrier will protect you from the vast majority of pistol ballistic threats you are ever likely to face. Please know that rifle rounds, unusually high velocity pistol ammunition, pistol ammo fired from a rifle barrel, armor piercing ammunition, sharp-edged or pointed instruments (e.g., knives, ice picks, etc.), and/or other unusual ammunition or situations CAN defeat certain ballistic panels.

    Purchaser covenants and agrees that the purchaser or his heirs, agents, assigns shall NEVER bring any action in any court of law.

    Any dispute arising from the Purchase and Sale of product(s) sold by Redemption Tactical, shall be resolved by Arbitration under the Rules of the American Arbitration Association. Venue for any arbitration, or any legal dispute, shall lie only in City of Midway, Wasatch County, UTAH and in no other Venue or Forum. The Laws of the State of Utah shall apply to all transactions.
    If any part o
    f these Terms are held to be invalid by a court or competent jurisdiction, such shall not affect the validity of any other part of these Terms. Headings are for convenience only, and do not limit or affect these Terms

    This website or print material could include technical or other inaccuracies or typographical errors. To simplify this statement getting shot always has a RISK.

  • Review

    Customer Reviews

    Based on 3 reviews Write a review
  • FAQs
    Need some help? Ask us!

You May also like

Customer Reviews

Based on 6 reviews

Amazing plates sound sturdy and not to heavy


Solid equipment, thanks for assisting with shipping Trent!


Great company with great service. Exactly what I expected


Good plates great company and great customer service highly recommend

Andrew Katt

Love the light weight plates! I also dig the coin!! Thank you very much!